Design Creations Photo Gallery

Projects, products and stuff DC has created.

     
 
PXL_20230913_082106051.jpg PXL 20230912 162729182ThumbnailsPXL 20230913 082110521PXL 20230912 162729182ThumbnailsPXL 20230913 082110521PXL 20230912 162729182ThumbnailsPXL 20230913 082110521PXL 20230912 162729182ThumbnailsPXL 20230913 082110521PXL 20230912 162729182ThumbnailsPXL 20230913 082110521PXL 20230912 162729182ThumbnailsPXL 20230913 082110521PXL 20230912 162729182ThumbnailsPXL 20230913 082110521

Some of the first few detail pieces in pace. The hatches/bulkheads ( or whatever them Squiddies and Jarheads call 'em, hehe).
The rails for the Depth charges are down too. I'm surprised at how even the paint on the smoke stacks came out despite my hands last night. They're pretty bad tonight, I've already flicked a bulked or two across the room as I was cleaning the brims off.

I have quite a few life rafts to apply, the guns, Exocets, numbers and all the railings and ladders. Those will be a challenge. The ladders are small, I may have to resin print them. Both tries in the Babmu really didn't work out. Scaling down to 50% is just too small for them. All the railings are straight, so I have to measure, cut and bend each section to fit. should be fun. Hence why the Super Structure still isn't glued down.

I have the antenna/Radar masts in the Saturn 2 now. The filament print on those was a wash too. Too many supports and the masts were too thin and fragile.

Rate this photo

0 comments